SynFoam Adhesives
Premium Quality Bonding Agents
SynFoam adhesives can be used to bond togther SynFoam blocks to form large complex structures. SynFoam adhesives provide superior bond strength without adding
significant weight to the final structure. The adhesive eliminates failures caused by
water absorption and coefficient of thermal expansion (CTE) mismatch. Synfoam adhesives may also be used to repair small defects in order to repair currently used syntactic foams.
Synfoam adhesives are supplied as two component systems that can be cured at either room temperature or elevated temperature. Synfoam adhesives are available as
1 gallon and 5 gallon kits.
Typical Properties
| Property | Units | SynFoam Adhesive 108 | SynFoam Adhesive 306 |
|---|---|---|---|
| Density | PCF(± 2) | 43 | 44 |
| Mix Ratio | By weight | 2:1 | 3:1 |
| Mixed Viscosity | cps | 95,000 | 120,000 |
| Pot Life (100 gms) | Hours | 1 | 8 |
| Cure Temperature | oF | 77 | 180 |
| Cure Time | Hours | 24 | 3 |
| Recommended For Use With | HP, SG, UL | AI, HP, SG, UL |